Selecting The Number Of Rings - Panasonic EASA-PHONE KX-T2470 Operating Instructions Manual

Initial Programmihg rcont.)
Be sure that the handset is on the cradle. the SP-PHONE indicator is off and the
AC adaptor is connected.
Press the PROGRAM button.
The MUTE/STORE indicator lights.
ilri.
ir,l
;:t
r',O
.tl
.r.!)
::ii
lii!,
o
5
t.
1
I t t l + [ * " Z l
W^01... [r"-r]r.7l
Auto mode 7 rings
Press " #" , lhen press "7" lol
number of rings setting.
The MUTE/STORE indicator goes out.
Select the number of rings by
pressing "0", "1", "2" ...or "7" .
"O"...auto mode (The display shows "A".)
See "AUTO setting" on page 15.
" 1 " . . . o n e r i n g ( T h e d i s p l a y s h o w s " 1 " . )
"2"...two rings (The display shows "2".)
:
"7"...seven rings (The display shows "7".)
Press the AUTO/STORE button
to store your settings.
The MUTE/STORE indicator lights.
Press the PROGRAM button.
The MUTE/STORE indicator goes out.
4
5
Selecting the number of rings
It is used to select the number of rings when this unit answers the calls.
The initial setting of the number of rings is
"2 rings".
fl=-t- enocnRv
a,e
V nurolsrone
Function of the AUTO setting (TOLL SAVER)
When you call the unit from an outside phone, the number of rings that it takes
for the unit to answer tells you if there are any new messages.
lf the unit answers on the 2nd ring:There is at least one new message.
lf the unit answers on the 4th ring:There are no new messages.
Hang up immediately when you hear the 3rd ring. Because the 3rd ring
indicates there are no new messages. This will save you the toll charge for the
c a l l .
- 1 5 -
I
- 1 6 -