Quick MILL LUCCA M58 Owner's Manual page 7

Direct connect- Continued
• After the boiler has finished filling then place whichever portafilter you intend to use
into the group head. Then lift the brew lever to start the pump and keep the lever up
until water comes out of the portafilter and then lower the lever.
• The heating indicator light will illuminate and the machine will start heating up. You
will hear some gurgling noises and a small amount of steam and water will be
discharged into the drip tray. This is normal to allow for the release of air and the
expanding of water in the boiler and heat exchange.
• The machine should reach temperature in approximately 15 minutes, but to make
delicious espresso with thick rich crema it is necessary to allow the machine to be
heated for 30-45 minutes with the portafilter kept in the grouphead.
Owner's Manual
LUCCA M58
Page 6