Changing Raid Mode - Buffalo TeraStation 1000 User Manual

Changing RAID Mode

To change the RAID mode, first put the drives in JBOD.
1
In Settings, click Drives.
2
Click to the right of "RAID".
3
Click the array to delete.
Note: If the "RAID Mode" field is blank, the array is already in JBOD. Proceed to step 7.
4
Click Delete RAID Array.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
6
Click OK.
7
Choose a RAID array.
8
Select a RAID mode and the drives to be used, then click Create RAID Array.
9
Step through the wizard to create the array.
Notes:
• You can also configure RAID settings from Easy Admin.
• After changing the RAID mode, create a shared folder.
27