Buffalo TeraStation 1000 User Manual page 70

and will support VMware and Windows clients but will not provide support for configuring your Linux or
other UNIX clients. There are many types of UNIX and the procedures for configuring NFS with them will vary
considerably. For help configuring your NetWare, Linux, or other UNIX clients for NFS support please consult
each client's own documentation and support.
1
In Settings, click File Sharing.
2
Click to the right of "Folder Setup".
3
Choose the shared folder that will be accessible to the NFS client.
4
Click the Advanced Settings tab.
5
Under "LAN Protocol Support", check "NFS" and click OK.
Note the NFS path. It will be used later for accessing data from NFS clients.
6
Click Close.
7
Move the NFS switch to the
8
Click to the right of "NFS".
9
Click Client Settings.
10
Click Add Client.
position to enable NFS.
69