Table of Contents
Advertisement
Chapter 3 UEFI Setup Utility
3.1 Introduction
his section explains how to use the UEFI SETUP UTILITY to conigure your system. he
UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI
SETUP UTILITY when you start up the computer. Please press <F2> or <Del> during the
Power-On-Self-Test (POST) to enter the UEFI SETUP UTILITY; otherwise, POST will
continue with its test routines.
If you wish to enter the UEFI SETUP UTILITY ater POST, restart the system by pressing
<Ctrl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. You may
also restart by turning the system of and then back on.
Because the UEFI sotware is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.
3.1.1 UEFI Menu Bar
he top of the screen has a menu bar with the following selections:
Item
Main
Advanced
H/W Monitor
Server Mgmt
Boot
Security
Exit
Event Logs
Use <
> key or <
> key to choose among the selections on the menu bar, and
then press <Enter> to get into the sub screen. You can also use the mouse to click
your required item.
Description
To set up the system time/date information
To set up the advanced UEFI features
To display current hardware status
To manage the server
To set up the default system device to locate and load the
Operating System
To set up the security features
To exit the current screen or the UEFI SETUP UTILITY
For event log coniguration
EP2C602D16FM
29
Advertisement
Table of Contents
