Description Of Graphical Symbols - Etesia PBE User Manual

4• descriptioN oF graphical symBols
conTrolS iDEnTificaTion
laBEl a : THroTTlE conTrol lEVEr
(PHE - PHTS)
a- start position to start by cold engine.
b- engine rate setting range
1- maximum rate
2- minimum rate
laBEl a : THroTTlE conTrol lEVEr
(PHTB)
a- start position to start by cold engine.
b- engine rate setting range
1- maximum rate
2- engine stop
laBEl B : PHTB SPEED VariaTor
conTrol
a - speed adjustement range
1 - maxi speed
2 - mini speed
1
2
1
a
2
1
a
a
1
laBEl c : DriVE conTrol
(PBTS - PHTS - PHTB)
- to move forward, push the control lever against
the handlebar.
- to stop, release the control lever.
b
laBEl D : MoTor STarTing anD
SToPPing conTrol
(PHE -PHTS - PBE -PBTS)
1- starting
1- press the safety lever against
the handlebars.
2- pull on the starter handle.
2- stopping
- release the safety lever.
b
laBEl E : PHTB BlaDE clUTcH
conTrol STarT
start
2
1- swing the blade clutch lever towards top
2- push the blade clutch lever hock towards front
3- Fold the blade clutch lever on the handlebar
stop
- to stop the blade release the blade clutch lever:
the blade is on stop and braked