Description Of Graphicals Symbols - Etesia PBE User Manual

2• desCriptioN of graphiCal symBols
cOnTrOlS iDEnTificaTiOn
laBEl a : THrOTTlE cOnTrOl lEVEr
(PHE - PHTS)
a- START position to start by cold engine.
b- Engine rate setting range
1- Maximum rate
2- Minimum rate
laBEl a : SPEED VariaTOr cOnTrOl
lEVEr (PHB - PHTB)
a- START position to start by cold engine.
b- Engine rate setting range
1- Maximum rate
2- Engine stop
laBEl B : PHTB SPEED VariaTOr
cOnTrOl
a - speed adjustement range
1 - maxi speed
2 - mini speed
2
1
a
2
1
a
a
1
laBEl c : DriVE cOnTrOl (PBTS-PHTS)
- To move forward, push the control lever against
the handlebar.
- To stop, release the control lever.
b
laBEl D : MOTOr STarTing anD
STOPPing cOnTrOl
(PHE -PHTS - PBE -PBTS)
1- Starting
1- Press the safety lever against
the handlebars.
2- Pull on the starter handle.
2- Stopping
- Release the safety lever.
b
laBEl E : PHTB PHB BlaDE clUTcH
cOnTrOl STarT
STarT
2
1-swing the blade clutch lever towards top
2-push the blade clutch lever hock towards front
3-fold the blade clutch lever on the handlebar
STOP
To stop the blade release the blade clutch lever:
The blade is on stop and braked