Lowrance LMS-522c iGPS Installation And Operation Instructions Manual page 182

From Overlay Data Shown (left) press ENT to see Data Viewer (center).
Select a category and press ENT. Next, select information to show on
screen and press ENT to check it and turn it on (right).
Steering
arrow
Map Page shows boat cruising Puget Sound, Washington with Overlay
Data turned on (left). This example shows Depth, Ground Speed and
the Steering Arrow. Note that the Steering Arrow always points di-
rectly to the destination you are navigating toward. In this case, the
boater is on a northwest course of 275º. Since the helmsman is on
course, the Steering Arrow is pointing straight ahead. If the helmsman
veered off course, the arrow would show which direction to steer to
get back on course. Sonar Page with Overlay Data turned on (right),
showing Depth, Ground Speed and the Track the boat is following.
To remove overlaid data:
1. While on the Page that shows the item or items you want to remove,
press |↓ to
MENU
2. You will see a list of the overlay data currently displayed. Select the
item you want to remove from your display and press
move the data. To remove another item, highlight the item and press
| .
ENT ENT
3. When you have finished removing Overlay Data, press
to the map page display.
|
O D ENT
VERLAY ATA
.
172
| to re-
ENT ENT
to return
EXIT