Depth Range - Automatic; Depth Range - Manual - Lowrance LMS-522c iGPS Installation And Operation Instructions Manual

1. From the Sonar Page, press
2. The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to
raise the cursor line.
3. To clear the depth cursor, press

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
Sonar Page menu with Depth Range selected (left). Depth Range Con-
1. From the Sonar Page, press
2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif-
ferent depth range. A blue bar highlights the selected range. The light
numbers cannot be selected.
3. When the new range is selected, press

Depth Range - Manual

You have complete control over the range when the unit is in the man-
ual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
|↓ to
MENU A
UTO
2. Press ↑ to
pears.
trol Scale (right).
D R
EPTH ANGE
|
D R ENT
EPTH ANGE
|↓ to
MENU
.
EXIT
|↓ to
MENU
EXIT
| .
ENT
and the Depth Range Control Scale ap-
67
|
D C
EPTH URSOR
|
D R ENT
EPTH ANGE
to clear the menu.
.
ENT
.