Tripmaster Switch; Setting Kilometers Or Miles; Setting The Clock - KTM 2009 690 Rally Factory Replica Owner's Manual

CONTROLS

Tripmaster switch

4.11
(Option: Tripmaster switch)
You can use the trip master switch to control the functions of the speedometer from the handlebar.
Info
The trip master is an optional accessory.

Setting kilometers or miles

4.12
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.

Setting the clock

4.13
WS (wheel size)
After the display function test, the wheel size WS is displayed briefly.
Info
2205 mm corresponds to the size of the 21" front wheel with a series produc-
tion tire.
The display then changes to the last selected mode.
400314-01
Condition
The motorcycle is standing.
–
Press the button
display.
–
Press the button
The Setup menu opens and the active functions are displayed.
–
Press the button
Km/h adjusting
–
Press the button
Mph adjusting
–
Press the button
400329-01
–
Press the button
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
Condition
The motorcycle is standing.
–
Press the button
the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Press the button
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
400330-01 the button
Info
The seconds can only be set to zero.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
repeatedly until the Km/h/Mph display flashes.
.
.
for 3 - 5 seconds.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
and/or button
briefly.
and the button .
11
.