Trip Calculator command: shows trip status and statistics.
Timers command: controls the up timer, down timer and alarm clock
settings.
Browse MMC Files command: this allows you to view the installed
MMC card and the files it contains.
Pages
The unit has three Page displays that represent the three major operat-
ing modes. They are the Satellite Status Page, the Navigation Page and
the Map Page. They are accessed by pressing the
or ← to select a Page. (Clear the Pages Menu by pressing
→
Pages Menu showing some Map display options.
Satellite Status Page
The Satellite Status Page, shown, provides detailed information on the
status of the GlobalMap's satellite lock-on and position acquisition. To
get to the Satellite Status Page: Press the
to select
S
TATUS
No matter what Page you are on, a flashing current position indica-
tor/question mark symbol and flashing GPS data displays indicate that
satellite lock has been lost and there is no position confirmed. The Sat-
ellite Status Page shows you the quality and accuracy of the current
satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers
have stopped flashing!
. (Clear the Pages Menu by pressing
PAGES
28
key, then using
PAGES
EXIT
key, then use
.)
EXIT
.)
or ←
→