Lowrance GlobalMap 5500C Operation Instructions Manual page 95

NOTE
The Customize command and the Overlay Data command both use the
same information categories. The difference between the two com-
mands is that Customize changes only the digital data boxes on a
screen, and Overlay Data changes only the information floating on the
screen without a box. See Customize Page Displays, on page 75 for in-
formation on customizing data boxes.
Overlay Data highlighted on GPS menu (left). The Data Viewer menu with
the Navigation category expanded.
To overlay information on your screen:
1. While on the Navigation Page or a Map Page, press |↓ to
MENU
| .
O D ENT
VERLAY ATA
2. You'll see a list of the overlay data currently shown on the screen, if
any overlay data has been chosen for display. Select and
(E )
NTER TO ADD
press . The data viewer shows information categories with "+" or "–"
ENT
symbols next to each category name. A category with a "+" next to it is
expandable, meaning its contents are hidden.
Selecting the category name and pressing will show the category's
ENT
contents, so you can choose items within it. An expanded category (one
with a "–" next to its name) can be collapsed to hide its contents. Just
select the category name and press .
ENT
3. Expand any categories that might contain data you want to display.
Then press ↓ or ↑ to select a data option.
4. With the data option highlighted, press to check it (turn on) and
ENT
uncheck it (turn off). As you turn it on, the data will appear on top of
the screen. Every Page display has a maximum number of items you
can show using the Overlay Data command.
5. After the desired changes are made, press | to return to the
EXIT EXIT
page display.
89