Delete Trail; New Trail; Trail Visible/Invisible And Other Trail Options; Transparency (Globalmap 5500C Only) - Lowrance GlobalMap 5500C Operation Instructions Manual

Specific Trail Options

Delete Trail

↓
To delete a specific trail: From the Trails Menu, press to Trail
Name| . The Edit Trail menu appears as seen in the following fig-
ENT
→ ←
ure. Press to | | to | .
D T ENT Y ENT
ELETE RAIL ES
Edit Trail menu.

New Trail

To manually start a new trail, in the Trails Menu, make sure
N T
EW RAIL
is highlighted and press | .
ENT EXIT

Trail Visible/Invisible and Other Trail Options

The name, maximum number of points in the trail, activity, and visi-
bility are all changed on the Edit Trail menu screen. The Active setting
determines whether or not the unit is recording new points for a par-
ticular trail.
then → to highlight the Active and/or
↓
On the Edit Trail menu, press
Visible checkboxes. Press to check (turn on) or uncheck (turn off)
ENT
the desired feature. Use ↑ ↓ or → ← to make other changes within the
Edit Trails menu. Press repeatedly to return to the main screen.
EXIT

Transparency (GlobalMap 5500C only)

Use the transparency menu to adjust the transparency of menu win-
dows. A high transparency allows you to continue monitoring the
screen's display while adjusting feature settings, though the text of the
menus may fade until it is unreadable. A low transparency will usually
make menu text easier to read at the cost of watching your display.
Experiment with this feature until you find the level of transparency
that matches your preferences.
102