Track Smoothing; Trail Options; Delete All Trails - Lowrance GlobalMap 5500C Operation Instructions Manual

option is set, press
To set Alarm Volume:
The left end of the scale is low volume; the right end is high volume. Af-
ter the option is set, press
To set Alarm Style:
the style, then press
turn to the page display.

Track Smoothing

This is a factory setting on the GPS Setup menu that should always be
left on. When stopped or traveling at slow speeds (such as walking or
trolling), Track Smoothing prevents wandering of trails.

Trail Options

There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated, you can display or hide trails, make them flash,
create a new trail, delete a trail, etc.
General Trail Options
To access the Trails Menu:
Press |
MENU MENU
Main Menu (left), Trails Menu (center) and Trail Options menu (right).

Delete All Trails

To remove all of the trails from memory: from the Trails Menu, press
to |
D A
ELETE LL
|
EXIT EXIT
↓
Press
EXIT
↓
Press to
. After the option is set, press
ENT
Track Smoothing option turned on.
↓
| to
M
Y
←
| to
ENT Y
ES
to return to the page display.
to . Press
V
OLUME
| to return to the page display.
EXIT
|
A S
LARM TYLE
| .
T ENT
RAILS
| .
ENT
100
→ ←
or to move the bar.
↑
. Press or
ENT
EXIT
↓
to change
| to re-
EXIT
→