Removing The Batteries; Way Icl Cable Connections Between Three - IBM SAN768B Installation, Service And User Manual

Removing the batteries

|
|
1 2
5
6
5
6
2
Figure 50. 3-way ICL cable connections between three SAN768B chassis
1 Chassis 1 (SAN768B)
2 Core switch blades
3 Chassis 2 (SAN768B)
For Fabric OS 6.4.0 and later, you can use three SAN768B chassis is an ICL
configuration if the third chassis is in an immediately adjacent rack.
Note: For clarity, the two sets of cables are drawn differently (solid and dashed) in
Figure 48 on page 105 throughFigure 50. Also note that one set is connected
to only the blades in the "low order" slots (slot 3 in the SAN384B and slot 5
in the SAN768B) and the other set is connected to the blades in the "high
order" slots (slot 5 in the SAN384B and slot 8 in the SAN768B). Keeping the
sets apart in this manner minimizes the cable confusion.
Local regulations may require removal of the battery before recycling or disposing
of the product. Batteries are located in the control processor blades (CP8) and also
in optional Encryption blades (FS8-18). Follow these steps to remove the batteries
from the product:
4
3
4 Chassis 3 (SAN768B)
5 ICL connector (ICL 1)
6 ICL connector (ICL 0)
Chapter 5. Removing and installing components
5
6
2
107