Blade Maintenance - Qualcast GLM3300 Operating Instructions Manual

avoid a hazard.

BlaDE MaintEnancE

(see fig f)
WARNING! Never carry out any
assembly operations or adjustments
with the power connected to the mower.
Always ensure that the power button is in
the off position and that the power plug is
disconnected from the supply.
Always handle the blade with care-sharp
edges could cause injury - always use safety
gloves.
Follow these procedures to remove and
replace the blade. You will need garden
gloves (not provided) and a spanner wrench
(not provided) to remove the blade. Hold
the blade (12) and unscrew the blade bolt
(11) anticlockwise using a spanner wrench.
Remove blade and attach a new one to the
blade bolt.
Ensure that the blade is properly positioned
as seen in Fig.F, then firmly tighten the bolt.
do not over tighten.
Renew your metal blade after 50hrs mowing
or 2 years, which ever is the sooner-regardless
of condition.
If the blade is cracked or damaged replace
it with a new one.
12
11
f
1200 Watt
Electric rotary Mower
Original instructiOns
stOragE (see fig g)
G
Clean the exterior of the machine thoroughly
using a soft brush and cloth. Do not use
water, solvents or polishes. Remove all grass
and debris, especially from the ventilation
slots.
Turn the machine on its side and clean the
blade area. If grass cuttings are compacted
in the blade area, remove with a wooden or
plastic implement.
Store the machine in a dry place. Do not
place other objects on top of the machine.
To aid storage loosen the handle knobs and
fold the handles.
You could carry the mover by carry handle
(9).
Ensure cables are not stuck or entangled
when folding or unfolding upper handles. Do
not drop the handles.
HElPlinE nO 0844 8010979