Find Interstate Highway Exits - Lowrance GlobalMap 3500C Operation Instructions Manual

A POI selected by the cursor, left, POI information screen, right.
NOTE:
Since the Go To Waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
Waypoint Information screen.

Find Interstate Highway Exits

1. From the Map Page, press
up the Find Exit menu.
Find Highway Exits command, left, and Find Exit menu, right.
2. First, select a highway name by pressing
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press ↑ or ↓
to change the first letter, then press → to move the cursor to the next
letter and repeat until the name is correct, then press
Jump down to the lower selection list by pressing
to select a highway from the list, then press
|↓ to
MENU H
IGHWAY
105
| while in the POI
ENT EXIT
|
E ENT
XITS
, which calls up the
ENT
, then press ↓ or ↑
ENT
.
ENT
, which calls
| . B.
ENT ENT