Communications Port Configuration; Configure Nmea - Lowrance GlobalMap 3500C Operation Instructions Manual

Communications Port Configuration

The unit has one NMEA 0183 version 2.0 compatible communication
port, or com port for short. The Com Port Menu, which is accessed from
the System Setup Menu, allows you to configure the communications
port to send or receive data to another electronic device, such as an
autopilot. The com port can be used for NMEA data transfer.
For connectors and wiring information for another device, see page 16.
For assistance in configuring the unit to communicate with another
device, consult the factory; customer service phone numbers are in the
back of this manual. Also see the entry Configure NMEA. To set Com
Port Configuration:
1. Press
MENU
2. Press ↓ to
C

Configure NMEA

You can configure the unit to use specific NMEA sentences.
1. Press
MENU
Main Menu, left, MMC File Browser, right.
Menus for changing Com Port settings.
| |↓ to
MENU S
OMMUNICATIONS
| |↓ to
MENU S
|
S ENT
YSTEM ETUP
| .
P ENT
ORT
|
S ENT
YSTEM ETUP
71
.
.