Find Any Item Selected By Map Cursor; Find Interstate Highway Exits - Lowrance GlobalMap 6500C Operation Instructions Manual

tion window. With the address location selected by the cursor on
the map, press
pears, with the Go To Waypoint command highlighted. If you want
to navigate to the POI address, just press
Map Page showing location of the address on the map, highlighted by
the cursor (left). The Address is a business in the POI database (cen-
ter), so you can display the POI information window, then navigate to
it. Address is not in the POI database (right), so the Waypoint key will
not display any information for this address.

Find Any Item Selected by Map Cursor

On the Map Page: with a POI or map feature selected by the cursor
press To return to the previous page, press
WPT.
A POI selected by the cursor (left) with POI information screen (right).
NOTE:
Since the Go To Waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
Information screen.

Find Interstate Highway Exits

1. From the Map Page, press
up the Find Exit menu.
. The POI's Waypoint Information window ap-
WPT
MENU
ENT
while in the POI Waypoint
ENT
↓
| to
H
IGHWAY
112
| .
EXIT
.
EXIT
| , which calls
E ENT
XITS