Heat & Glo SUPREME-M-I30AU Owner's Manual page 44

FRONT END OF LOG
RESTS ON FLAT SPOT
Figure 9. Position Log #5
Log #5 (SRV2206-703): Position Log #5 as shown in Figure 9. See Figure 4 for additional references. Place the thick end
of Log #5 on the large fl at spot on Log #1. Rest the front end of Log #5 on the large fl at spot of Log #2.
Log #6 SRV(2206-706): Position Log #6 as shown in Figure 10. See Figure 8 for additional references. Rest the left end
of Log #6 on the fl at spot of Log #3. Position the nose of Log #6 on the fork of Log #4.
Figure 11. Log Set Installed with Optional Refractory
44
REST LOG ON
LARGE FLAT SPOT
5
Heat & Glo • Supreme-N-I30AU, Supreme-P-I30AU • 2222-900 Rev. C • 2/11
LEFT END OF LOG
RESTS ON FLAT
SPOT
Figure 10. Position Log #6
POSITION THE NOSE
ON THE
FORK OF THE LOG
6
2206-935