Configuring System Time - EnGenius EnStation2 User Manual

B N S C S T
ASIC ETWORK ETTINGS ONFIGURING YSTEM IME

4.5.7 Configuring System Time

Change the system time of the EnStation2 by manually entering the information, synchronizing the device with a PC, or setting up
automatic updates through a network time (NTP) protocol server:
Manually Set Date and Time
Enter the date and time values in the date and time fields or
click the Synchronize with PC button to get the date and
time values from the administrator's PC.
Automatically Get Date and Time
Select a time zone from the drop-down list and check whether
you want to enter the IP address of an NTP server or use the
default NTP server.
Enable Daylight Saving
Click to enable or disable daylight savings time. Select the
start and stop times from the Start Time and Stop Time
drop-down lists.
Click Save/Apply to apply the changes or Cancel to return
to previous settings.
4-47