Point-To-Point Protocol Over Ethernet (Pppoe) - EnGenius EnStation2 User Manual

B N S P - -P P E (PPP E)
ASIC ETWORK ETTINGS OINT TO OINT ROTOCOL OVER THERNET O

Point-to-Point Protocol over Ethernet (PPPoE)

Point-to-Point Protocol over Ethernet (PPPoE) is
used mainly by ISPs that provide DSL modems to
connect to the Internet.
MTU
Enter the maximum transmission unit (MTU). The
MTU specifies the largest packet size permitted
for an Internet transmission (PPPoE default:
1492). The MTU size can be set between 576 and
1492.
Login
Enter the username assigned by an ISP.
Password
Enter the password assigned by an ISP.
Service Name
Enter the service name of an ISP (optional).
Connect on Demand
Select the radio button to specify the maximum idle time. An Internet connection will disconnect when it reaches the maximum idle
time, but it will automatically connect when a user tries to access the network.
Keep Alive
Select whether to keep the Internet connection always on, or enter a redial period once the internet lose it connection.
Get Automatically From ISP
Click the radio button to obtain the DNS automatically from the ISP.
4-15