Configuring Wireless Lan; Configuring Wireless Settings; Access Point Mode - EnGenius EnStation2 User Manual

B N S
ASIC ETWORK ETTINGS

4.4 Configuring Wireless LAN

4.4.1 Configuring Wireless Settings

Below are the Instructions on how to configure the wireless and security settings for each of the possible operating modes:
WARNING!
!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this section without a
thorough understanding of the parameters.

Access Point Mode

The EnStation2 supports Access Point Mode. In this mode, users with a wireless client device within range can connect to the
EnStation2 to access the WLAN.
Wireless Mode
Wireless mode supports 802.11b/ g/n mixed
modes.
Channel HT Mode
The default channel bandwidth is 20/40 MHz. The
larger the channel, the better the transmission
quality and speed.
Extension Channel
Select upper or lower channel. Your
selection may affect the Auto Channel
function.
Channel / Frequency
Select the channel and frequency appropriate.
4-22
C W LAN
ONFIGURING IRELESS