Client Bridge Mode - EnGenius EnStation2 User Manual

B N S C B M
ASIC ETWORK ETTINGS LIENT RIDGE ODE

Client Bridge Mode

Client Bridge Mode lets you connect two LAN segments via a wireless link as though they are on the same physical network. Since
the computers are on the same subnet, broadcasts reach all machines. As a result, DHCP information generated by the server reaches
all client computers as though the clients as residing on one physical network.
Wireless Mode
Wireless mode supports 802.11b/ g/n mixed
modes.
SSID
Specifies the SSID if known. This field is
completed automatically if you select an Access
Point in the Site Survey.
Site Survey
Scans nearby locations for Access Points. You can
select a discovered Access Point to establish a
connection.
Prefer BSSID
Enter the MAC address if known. If you select an
Access Point in the Site Survey, this field is
completed automatically.
Wireless Security
For details on wireless security settings, see Configuring Wireless Security. Click Accept to confirm the changes or Cancel to cancel
and return to previous settings.
4-24