Client Router Mode - EnGenius EnStation2 User Manual

B N S C R M
ASIC ETWORK ETTINGS LIENT OUTER ODE

Client Router Mode

In Client Router Mode, you can access the Internet wirelessly with the support of a WISP. In AP Router Mode, the EnStation2 can
access the Internet via a cable or DSL modem. In this mode, the EnStation2 can be configured to turn off a wireless network name
(SSID) broadcast, so that only stations that have the SSID can be connected. The EnStation2 also provides wireless LAN 64/128/
156-bit WEP encryption security, WPA/WPA2, and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It
also supports VPN pass-through for sensitive data secure transmission.
Wireless Mode
Wireless mode supports 802.11b/ g/n mixed
modes.
SSID
Specifies the SSID if known. This field is
completed automatically if you select an Access
Point in the Site Survey.
Site Survey
Scans nearby locations for Access Points. You can
select a discovered Access Point to establish a
connection.
Prefer BSSID
Enter the MAC address if known. If you select an Access Point in the Site Survey, this field is completed automatically.
Wireless Security
See Configuring Wireless Security.
Click Accept to confirm the changes or Cancel to cancel and return to previous settings.
4-28