Dynamic Ip - EnGenius EnStation2 User Manual

B N S
ASIC ETWORK ETTINGS

Dynamic IP

Dynamic IP addressing assigns a different IP
address each time a device connects to an ISP
service provider. The service is most commonly
used by ISP cable providers.
Account Name
Enter the account name provided by your ISP.
Domain Name
Enter the domain name provided by your ISP.
MTU
The maximum transmission unit (MTU) specifies the largest packet size permitted for an internet transmission. The factory default
MTU size for Dynamic IP is 1500. The MTU size can be set between 576 and 1500.
Get Automatically From ISP
Click the radio button to obtain the DNS automatically from the DHCP server.
Use These DNS Servers
Click the radio button to set up the Primary DNS and Secondary DNS servers manually.
Discard Ping on WAN
Check the box to enable pings to be recognized on the EnStation2 interface. Uncheck the box to disable the feature and block pings
on the EnStation2 Wan interface.
Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid.
Blocking pings provides some extra security from hackers.
Click Accept to save the settings or Cancel to discard changes.
4-14
D IP
YNAMIC