Pole Mounting The Device - EnGenius EnStation2 User Manual

I
NSTALLATION

Pole Mounting the Device

A. Plug the dynamic stick into the bracket.
B. Combine the sealing nut with the assembled kit.
Tighten to secure together.
C. Put the mock washer on the dynamic stick.
D. Assemble the mounting kit with the CPE.
E. Thread the open end of the pole strap through the two
tabs on the bracket.
F. Lock and tighten pole strap to secure bracket to the pole.
Figure 2-3: Pole Mounting the Device
2-4
P M D
OLE OUNTING THE EVICE