Table of Contents
Advertisement
❑ Kwik Bond 5 Minute Epoxy
❑ Kwik Bond Thin and Thick C/A
❑ # 0, #1 and # 2 Phillips Head Screwdrivers
❑ 1.5mm Hex Wrench
❑ Adjustable Wrench
❑ Wire Cutters
❑ Excel Modeling Knife
❑ Scissors
❑ Electric or Hand Drill
❑ Assorted Drill Bits
❑ Ruler
❑ Pencil
❑ T-Pins
Before you begin assembly, group the parts as we list them below. This will ensure that you have all of the parts before you begin
assembly and it will also help you become familiar with each part.
IF YOU FIND ANY PARTS MISSING OR DAMAGED, PLEASE CONTACT US DIRECTLY, USING THE
AirFrAme Assemblies
❑ (1) Fuselage
❑ (1) Top Wing with Ailerons
❑ (1) Center Wing
❑ (1) Bottom Wing
❑ (1) Horizontal Stabilizer with Elevator
❑ (1) Rudder
lAnDing geAr Assembly
❑ (1) Gear Wing
❑ (2) Main Gear Wheels
❑ (1) Carbon Fiber Axle
❑ (4) Rubber Wheel Retainers
❑ (2) Landing Gear Struts
❑ (4) Aluminum Brackets (U-Shaped)
❑ (2) Aluminum Brackets (Straight)
❑ (12) M2 x 8mm Wood Screws
Control systems Assemblies
❑ (4) Carbon Fiber Pushrods (2 Short and 2 Long)
❑ (4) Prebent Wires with Z-Bends
❑ (4) Heat-Shrink Tubing
❑ (4) Plywood Control Horns
❑ (12) C/A-Style Hinges
tools AnD supplies reQuireD
kit Contents
CUSTOMER SERVICE INFORMATION ON PAGE # 3.
Page
❑ Builder's Triangle
❑ 220 Grit Sandpaper with Sanding Block
❑ Masking Tape
❑ Paper Towels
❑ Rubbing Alcohol
❑ NHP Epoxy Mixing Sticks
❑ NHP Epoxy Mixing Cups
❑ K&S 30 Watt Soldering Iron
❑ Solder
❑ Heat-Shrink Tubing (Assorted Sizes)
❑ Global Heat-Sealing Iron (Optional)
❑ Global Heat Gun
Advertisement
Table of Contents
