Removing The Print Block - Toshiba TRST-A15 SERIES Maintenance Manual

3. DISASSEMBLY AND REASSEMBLY
3. Disconnect the six connectors A to F from the Main PCB. The PCB Cage can then be
removed from the Print Block.
4. Remove the four 3x6 s-tite screws, then remove the Main PCB from the PCB Cage.
F
A
3x6 s-tite screws
PCB Cage

3.2.5 Removing the Print Block

1. Unplug the wire connecting the Print Block to the Paper Low Sensor.
You may now proceed to remove the Silver Earth Wire by unscrewing the 3x6 s-tite screw
connected to the earth plate.
Paper Low Sensor
Wire
Earth Plate
E
C
B
D
D
3-9
3.2 DISASSEMBLING THE MAIN BODY
F E
C
B
A
Main PCB
3x6 s-tite screws
Print Block
3x6 s-tite screw
SPAA-214-R1