Stream - Pacific Communications SmartIP-8SD User Manual

• Local Exposure: Activate Local Exposure. Use Local
Exposure on images that appear too dark due to
backlighting conditions and on images containing
over-exposed sections. Greater the value, clearer the
image. e.g.) Dark parking lot entrances and gas station
entrances at night (Local Exposure compensates
for the bright light coming from incoming vehicle
headlights and makes it possible to see the license
plates).
• Anti-Flicker: If the lights in the area where the
camera is located use alternating current, specify
the frequency of the lights to minimize flickering.
Matching the frequencies can eliminate flickering
completely. (NTSC: 60Hz, PAL: 50Hz).
• Slow Shutter: Activate Slow Shutter. The electronic
shutter's speed will decrease to the specified level
under low-lighting conditions to allow more light in
and therefore produce brighter images.
• Focus Mode: Used to change the focus movement
format as Auto/Manual/Semi-Automatic. It may not
be supported depending on the device.
• Shutter Speed Control: Adjust Shutter Speed. This
option is available only when Anti-Flicker and Slow
Shutter are both set to Off.
- Auto: The system will assess the lighting conditions
and adjust the shutter speed automatically.
- Manual: Use the slider to select the desired
shutter speed. Select the most suitable minimum
and maximum shutter speeds for the lighting
conditions in the area where the camera is located.
(1/30 to 1/8000)
Select Apply after setting up a camera to see images
from the concerned camera on the left side of the
screen. Selecting Apply or OK displays a popup screen
that indicates whether the camera has been set up
successfully or not.
Miscellaneous
• Image Stabilizer: Activate Image Stabilizer. The
Image Stabilizer reduces blurring caused by camera
shake that results from external conditions such as
the wind.

Stream

Configure the camera's live and recording resolution,
compression method, picture quality, transfer speed,
and ips speed settings.
• Camera Channel: It's possible to configure a unique
video profile for each camera.
• : Apply the video profile settings of the camera
selected under Camera Channel to a different camera.
• Live/Remote Video Profile: Check the current Live
video picture quality and edit remote video profile
settings.
- Use Dynamic Remote Stream: Automatically
transmits the Live 1 (Single Screen), Live 2 (2x2), or
Remote (greater than 2x2) stream, depending on
the remote program's live screen layout.
• Record Video Profile: Set up 4 recording quality
profiles.
• Video Profile: Select Live 1, Live 2, Remote, or
Custom (available from Record Video Profile only).
Live 1 and Live 2 allows the user to change Bitrate
and Quality settings only and configures the
remaining settings automatically.
- Compression Method: Supports H.264.
- Resolution: Select a resolution supported by the
camera. Maximum available resolution is chosen
automatically based on the selected video profile.
- Quality: Select Very High, High, Standard, or Low.
You can assign different Quality settings to different
cameras.
- Bitrate: Select CBR or VBR. Transmitted data size
is fixed with CBR but varies depending on the
amount of movements in the images with VBR.
Part 3 - Configuration
47