9 LEDs
• Power LED: Lights up while the main unit is in
operation.
Network LED: Flashes when linked remotely
•
over an ethernet.
HDD LED: Flashes when data is being written
•
on the HDD or a video search is in progress.
eSATA LED: Flashes when connected to an
•
eSATA device.
Panic LED: Flashes in red when Panic Recording
•
is in progress.
Alarm LED: Lights up in red when an alarm
•
event occurs.
0 USB Ports
• Storage Device Connection
Connect an external USB hard drive or a USB flash
memory device to one of the USB ports for use with
the Clip Copy feature. The external storage device
should be placed as close to the NVR as possible.
It is recommended that you use a connection
cable that is no longer than 180cm in length. Use
the connection cable included with your external
storage device to connect the device to one of NVR's
USB ports. For more information Clip Copy, refer to
the Clip Copy on page 70.
Connections on the Front Panel
IR Remote Control
Flash Memory
Mouse
• Peripheral Device Connection
Use the USB ports to connect peripherals such as a
USB mouse or a USB printer to the NVR. You can also
use a USB-to-serial converter and connect multiple
text-in devices to the NVR at the same time. Connect
the printer to one of NVR's USB ports. For more
information on printing video stills, refer to the Print
on page 71.
For USB flash memory devices, the NVR supports
the FAT32 file format only.
USB HDD
Part 1 – Introduction
13