Miele KM 2354 Operating And Installation Instructions page 29

Problem
The gas flame goes out
after being lit.
The shape and colour of
the flame have changed.
The gas flame goes out
during operation.
The ignitor on the burner
does not spark.
Possible cause
The flames aren't touching the
ignition safety device and
therefore it is not heating up
enough:
- The burner components
aren't correctly in position.
- The ignition safety device is
dirty.
The burner components aren't
correctly in position.
The burner head or burner cap
holes are dirty.
The burner components aren't
correctly in position.
The mains fuse has tripped.
- Food deposits have lodged
themselves between the
ignitor and the burner cap.
- There are food residues
on the ignition safety device.
Problem solving guide
Remedy
Ensure the burner components are
correctly assembled.
Remove any soiling.
Ensure the burner components are
correctly assembled.
Remove any soiling.
Ensure the burner components are
correctly assembled.
If it has, contact a qualified electrician
or Miele.
Remove any soiling. See also "Cleaning
and care".
29