SENKO P 7 AIR Instruction Manual page 9

Table of Contents

Advertisement

Do not touch the stove with wet or moist body parts and ensure that
the product is always plugged to a properly grounded socket.
The stove is hot during operation and the use of protective
heat insulated gloves is compulsory during handling (opening
and closing of firebox door, removing the ash pan and similar).
It is forbidden to alter safety rules without the permission or
instructions by the manufacturer.
Do not pull out, remove or bend electric cables from the stove even
if the stove has been disconnected from the power grid.
Avoid plugging or reducing the dimensions of air supply opening in
the room where stove has been installed. Air supply openings are
necessary for proper combustion. Minimum combustion air opening
is 10 cm x 10 cm (or a hole with approximate diameter of 12 cm).
During regular stove operation, firebox door must be closed at
all times.
Control possible primary air supply and flue gases channels for
possible clogging before activating the stove after a long period of
inactivity of the stove.
Following repeated attempts to turn on the stove, accumulated non-
combusted pellets must be removed from the firebox prior to
subsequent attempt.
Pellet tank lid must be closed at all times.
In case of chimney fire, turn off the stove, turn off the switch at the
backside of the stove and never open the firebox door. Also ensure
appropriate fire extinguishers and/or call the local fire department.
If you lose this Manual, you can get a copy from SENKO Company
or its authorized representative. You can also find it at
http://en.senko.hr/.
SENKO pellet AIR stoves – Instruction manual
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P 10 air

Table of Contents