SENKO P 7 AIR Instruction Manual page 45

Recommendations

activation and deactivation time intervals should include
one day only, from 00:00 to 23:45h, which means that the
stove can't work from Friday to
Saturday, for instance
EXAMPLE:  start at 06:00 h

WRONG
 SOLUTION:
Prog1: Start 21:00, Stop 23:45
Prog2: Start 00:00, Stop 05:00
 the programme uses the lower
value (05:00 h) as activation !

according to previous example, you
can
„ascending"
„descending"!

before
function, you should set the
current day and hour (if you still
haven't) following instructions in
chapter 5.5.1.

for the Chrono function to work,
it needs
programmed, but also activated
(ENABLE) as shown in figure 34
23.0°C
Chrono Prog.
SENKO pellet AIR stoves – Instruction manual
:
!
 stop at 17:00 h
 start at 21:00 h
 stop at 05:00 h
programme
hours, but
using the Chrono
!
not only
10:41



only
NOT
be
.
23.0°C
10:35
OFF
Mode:AUTO Menu
Temp:23°C Fan:A
esc Set
< Day and time >
esc Set
< Chrono >
esc Off Set
< Enable >
esc Set
< Prog.1 >
esc Off Set
< P1 Enable >
esc On Ok
< P1 Enable >
esc On Ok
< Enable >
Figure 34
44