SENKO P 7 AIR Instruction Manual page 15

Adjoining walls must be constructed of brick or concrete, or other non-
flammable materials, i.e. protected with insulation. The stove emits heat,
especially on the firebox level, therefore, no flammable or heat sensitive
objects must be placed nearby (for example, alcohol, paper, plastic
objects...).
The stove must be installed with adherence to minimum prescribed
measures and constant control of the safety distance from the walls and
the furniture (figure 4). If the floor is made of flammable material (e.g.
wooden parquet) it must be protected with a single plate made of non-
flammable material which must be placed under and around the stove to
prevent floor overheating problems (figure 4 – floor protection).
Flammable
objects
A 200 mm
B 1500 mm
C 300 mm
We recommend to install the stove as close to the smoke venting pipe
as possible, limiting the number of roundings to a minimum (max 3 +
inspection and cleaning T-piece) and chimney horizontal parts (max total
3 m with a 3-5 % incline)  see 4.5. Connection to chimney.
SENKO pellet AIR stoves – Instruction manual
Non-flammable
objects
100 mm
800 mm
200 mm
table 3
Figure 5
14