Audio Settings - Panasonic Road Choice 1000-RIO160U Operating Instructions Manual

Audio Settings

[VOL]
selects a value in the audio menu.
(PUSH SEL : Select)
selects items in the audio menu.
1
Press [VOL] (PUSH SEL) to open the audio menu.
Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment), the dis
play returns to the regular mode.
2
Press [VOL] (PUSH SEL) to select a mode to be
adjusted.
(Setting Range: 0 to 40, Default: 18)
(Setting Range: −12 dB to +12 dB by 2 dB, Default: 0 dB) q / w : Adjustment
(Setting Range: −12 dB to +12 dB by 2 dB, Default: 0 dB) q / w : Adjustment
(Setting Range: 15 levels each, Default: CNT (center))
(Setting Range: 15 levels each, Default: CNT (center))
Notes:
¡ The volume can also be adjusted directly using [VOL] on the main unit. (a "General")
¡ Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.
¡ If the fader is set to front, the pre-amp. output (rear) is decreased.
Volume
Bass
Treble
Balance
Fader
3
Turn [VOL] clockwise (q ) or counterclockwise (w)
to adjust.
q / w : Adjustment
q / w : Adjustment
q / w : Adjustment
T
If
Che
If th
rec
Pan
onl
the
Pan
of n
you
Nev
-
bec
Co
No
No
No
No
lef
or
Le
so
rev
Di
No
dis
ca
So
so
So
to
Di
ab
Ra
Fre
Pr
de