Audio Settings - Panasonic CQ-C1103W Operating Instructions Manual

Audio Settings

[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to Select)
selects items in the audio menu.
1
Display the audio menu.
Press [VOL] (PUSH SEL).
2
Select a mode to be adjusted.
Press [VOL] (PUSH SEL).
(Setting Range: 0 to 40, Default: 18)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: 15 levels each and 0 (center),
Default 0)
(Setting Range: 15 levels each and 0 (center),
Default 0)
Note: If the fader is set to front, the pre-amp. output
(rear) is decreased.
Note: If no operation takes place for more than 5 seconds
in the audio menu (2 seconds in Main volume adjustment),
the display returns to the regular mode.
3
Volume
Bass
Treble
Balance
Fader
[DISP] (Display)
exits from the audio menu.
Adjust.
Turn [VOL].
q :
Up
w :
Down
q :
Increased
w :
Decreased
q :
Increased
w :
Decreased
q :
Right enhanced
w :
Left enhanced
q :
Front enhanced
w :
Rear enhanced