Panasonic Road Choice 1000-RIO160U Operating Instructions Manual page 9

Preparation
First Time Power On
-
1
Set your car's ignition switch
to the ACC or ON position.
2
Press [SRC] (PWR : Power).
Battery Installation
Pull the insulation film out
from the backside of the
remote control unit gently.
Note: Battery Information:
Battery Type: Lithium battery (CR2025) (Included in the
remote control unit)
Battery Life: Approximately 6 months under normal use (at
room temperature)
Clock Setting
The 12-hour (AM/PM) system is used for the clock display.
1
Press [CLK] (Clock).
2
Hold down [CLK] for more than 2 seconds.
3
Adjust the hour.
[7 ]: sets the hour ahead.
[6 ]: sets the hour back.
4
Press [CLK] .
5
Adjust the minute.
[7 ]: sets the minute ahead.
[6 ]: sets the minute back.
6
Press [CLK] .
(clock display)
Hour blinks.
Hour entered
Minute blinks.
Minute entered
Completed
Notes:
¡ "CLK ADJUST" is displayed before adjusting the clock.
¡ Hold down [6 ] or [7
¡ When "NO DISC" is displayed, the clock cannot be ad -
justed.
¡ When you want to readjust the clock, repeat steps 2 to 6.
Clock Display at Power O
Press [DISP] to change the display.
cd
] to change numbers rapidly.
Display o
Clock display (Default)