Level 3 Service Manual
Removing and Replacing the Flip Cover
6881040B60
1.
Remove the battery housing, battery, antenna, rear housing assembly,
transceiver board assembly, and keypad as described in the procedures.
2.
Using the disassembly tool, lift the bottom end of the flip cover away from the
flip assembly as shown in Figure 13.
DISSASSEMBLY TOOL
Figure 13. Removing the Flip Cover
3.
To replace, align the top corners of the flip cover with the opening of the flip
barrel and push down on all 4 corners of the cover until it snaps into place.
4.
Replace the transceiver board, metal chassis shield, rear housing assembly,
antenna, battery, and battery housing as described in the procedures.
August 01, 2002
Disassembly
020253o
31