Removing And Replacing The Display Module - Motorola T720 Instruction Manual
Tri-band digital wireless telephone
Hide thumbs
Also See for T720:
- User manual (196 pages) ,
- Service manual (123 pages) ,
- Instruction manual (113 pages)
Table of Contents
Advertisement
Disassembly
Removing and Replacing the Display Module
36
1.
Using a Torx driver with a T-6 bit, remove the 4 screws from the display module
(See Figure 18).
Figure 18. Removing the Display Module
2.
Lift the display module up and slide it out if its housing, being careful to not
damage or stress the flex connector.
3.
To replace, thread the flex connector into the housing barrel and seat the
display module back into the flip front housing.
4.
Replace the 4 display module screws.
5.
Replace the keypad, keyboard assembly, spacer gasket, transceiver board
assembly, rear chassis assembly, antenna, battery, and battery housing as
described in the procedures.
August 01, 2002
SCREWS
SCREWS
Product Family B65
020263
6881040B60
Advertisement
Table of Contents
Troubleshooting
