Life Fitness 9500 Operation Manual page 11

TELEMETRY option enable/disable
l
This diagnostic state allows you to enable the Polar
function allowing the Cross-Trainer to receive the heart rate signal from a Polar
heart rate chest strap.
The factory default setting for this option is enabled. To change this setting enter Diagnostic
State 6 (follow the instruction for Maximum Program Time to enter the diagnostic states).
The Message Center will display "TELEMETRY ON". To change the default to "OFF", press
the 5 key and the system will toggle between OFF and ON.
You may also use the
the setting to ON.
The ENTER key LED will indicate when the value is set at the default — TELEMETRY ON.
Pressing the CLEAR / PAUSE key repeatedly will exit you out of the diagnostic states.
Pressing the ENTER key will advance you to Diagnostic State 7.
For more information on the other Diagnostic States please refer to the Life Fitness
Cross-Trainer Service Manual available from Life Fitness Customer Support Services.
(See How to Obtain Product Service for information on how reach Customer Support Services.)
key to change the setting to OFF and the
11
® compatible heart-rate telemetry
®
compatible
key to change