Related Manuals for buster BUSTER L
Summary of Contents for buster BUSTER L
- Page 1 Inha Works Ltd. 2009 1 (31) OWNER'S HANDBOOK BUSTER L 2010 Inha Works Ltd. Saarikyläntie 21, FI-63700 Ähtäri tel. +358 6 5355 111 Your authorised Buster dealer:...
- Page 2 Naturally, the Owner's Handbook cannot provide you with seamanship skills or information on boating safely. If the Buster is your first boat, or you have changed to a type of boat with which you are unfamiliar, for the sake of your comfort and safety, please acquire sufficient handling and operating experience before you take on the responsibility of command.
- Page 3 Inha Works Ltd. 2009 3 (31) STORE THIS HANDBOOK IN A SAFE PLACE AND HAND IT OVER TO THE NEXT OWNER WHEN YOU RELINQUISH THE BOAT. I Owner First name: _____________________________ Surname:__________________________ Residence: _____________________________ Year of purchase:____________________________ II Owner First name: _____________________________ Surname:__________________________ Residence: _____________________________...
-
Page 4: Table Of Contents
Inha Works Ltd. 2009 4 (31) Contents 1 General 2 Definitions 3 Warranty 4 Before launching 4.1 Registration 4.2 Insurance 4.3 Training 5 Boat characteristics and operation 5.1 General 5.2 Basic information about the boat 5.3 Recommended maximum number of people on board 5.4 Loading 5.5 Engine and propeller 5.6 Preventing water getting on board and stability... -
Page 5: Before Departure
Inha Works Ltd. 2009 5 (31) BEFORE DEPARTURE... Read this Owner's Handbook thoroughly, and before departure always check: Prevailing weather conditions and the weather forecast Assess the wind conditions, the state of the sea, and visibility. Is your boat's design class, size, and on-board equipment, together with the skills of the helmsman and crew sufficient for the waterways which you intend to use? Load capacity... -
Page 6: General
, Separate warranty cards, together with contact information for their suppliers, are enclosed for all equipment/devices. For other issues relating to the warranty we request that you contact the Buster dealer indicated on the cover of this handbook. -
Page 7: Before Launching
5.2 Basic information about the boat The basic information of the Buster L is as follows: Boat model: Buster L... -
Page 8: Recommended Maximum Number Of People On Board
Inha Works Ltd. 2009 8 (31) and a corresponding swell (a significant wave height of up to 2 m with occasional waves of 4 m maximum). Such conditions can occur in open water on lakes, estuaries, and in coastal waters in moderate weather. ATTENTION! the significant wave height is the average height value of the upper third of the swell which roughly corresponds to an... -
Page 9: Loading
Avoid storing heavy weights at too high an elevation. 5.5 Engine and propeller The largest recommended engine capacity for the Buster L is 37 kW (50 hp) When fitting the engine and choosing a propeller, comply with the engine manufacturer’s instructions. -
Page 10: Preventing Water Getting On Board And Stability
The location of deck openings and their respective plugs are shown in Diagram 2. The Buster L has an outlet for draining rain water from the cockpit. This outlet is meant to be plugged if you observe water flowing back into the cockpit through the drain outlets when the boat is loaded. -
Page 11: Stability And Buoyancy
Stability can also be diminished when towing or being towed. The Buster L is equipped with pontoons to help the boat carry loads, as defined in paragraph 5.4, even when the boat has filled with water. -
Page 12: Fire Extinguishing And Fire Prevention
5.7.2 Fire extinguishing and fire prevention Buster L is equipped with a 2-kg hand-held powder extinguisher with a fire rating of 13A89BC (Diagram 3). The extinguisher is located in the storage space on the left- hand side of the prow. Its position is indicated by a clearly visible symbol in the cockpit. -
Page 13: Electrical System
Inha Works Ltd. 2009 13 (31) Never • obstruct access to safety equipment, for example, to the extinguisher and the main power switch of the electrical system. Before using the boat, always remember to unlock the padlock of the storage space (for the extinguisher). •... - Page 14 Inha Works Ltd. 2009 14 (31) Diagram 4. Location of electrical devices: 1) Accumulator housing; 2) Main power switch; 3) Bilge pump; 4) Mast light (detachable), white 360°; 5) Navigation light (detachable), with colour sectors; 6) Switch panel (see Diagram 5.); 7) Power outlet, 12V DC, 10A;...
- Page 15 Circuit fuses are located next to the main switch in a separate fuse box inside the rear seat on the left side of the boat. The Buster L uses automatic fuses which can be reconnected after overloading by pushing the tripped pin back down. In the electrical system, there are two extra circuits equipped with fuses (Extra 1 5A and Extra 2 10A).
- Page 16 Inha Works Ltd. 2009 16 (31) Diagram 6. Fuse box: 1) Navigation lights 5A (A+); 2) Bilge pump 5A (C++); 3) Power outlet 10A (12V+); 4) Extra circuit 5A (X1); 5. Extra circuit 10A (X2). When leaving the boat unattended for a long period, switch off the current at the main switch.
-
Page 17: Control Characteristics
5.9.1 Driving at high speeds The recommended maximum engine output for the Buster L is 37 kW (50 hp). Do not use a boat with an engine that has a greater output than that which is indicated on the manufacturer’s plate. -
Page 18: Dead-Man's Grip
Inha Works Ltd. 2009 18 (31) speed and your wake as a matter of courtesy, and also for the safety of yourself and others. • visibility (islands, fog, rain, blinding sun). • knowledge of the route (time required for navigation). •... -
Page 19: Securing Loose Equipment
5.10.3 Respect for the environment Shorelines everywhere (sea and lakes alike in all countries where Buster boats are sold) are a precious natural resource and their preservation is a matter of honour for all sailors. -
Page 20: Anchoring, Mooring And Towing
Inha Works Ltd. 2009 20 (31) 5.10.4 Anchoring, mooring and towing Always anchor your boat carefully even in sheltered spots, as conditions can change suddenly. The mooring line should be equipped with a spring-loaded device to cushion the effect of jerking. See the attaching points in Diagram 8. Do not use other parts of the boat for mooring, towing, or anchoring. -
Page 21: Trailer Towing
The boat weight of the boat, with the engine and accumulator, is 500-520 kg. This does not include fuel and equipment load. Before lifting your Buster boat onto a trailer, make sure the trailer is appropriate for the boat, the support is adequate to minimise the load at each individual point, the bow stop assembly is in a suitable position in relation to the trailer's axle and that the trailer’s carrying capacity is... -
Page 22: Service, Repairs And Winter Storage
Service, repairs and winter storage Information about maintenance, winter storage, service and repairs can be found on the internet at http://www.busterboat.com or provided by your nearest Buster dealership. Major damage to the aluminium surface or other surfaces should always be repaired by an authorised Buster dealership. - Page 23 CIN code in the following table. When dealing with the boatyard or dealer, tell them the CIN code and boat type so as to facilitate delivery of the correct spare parts. Type: Buster L CIN code: FI-BUSR Engine brand and model:...
- Page 24 Inha Works Ltd. 2009 24 (31) BOAT'S TECHNICAL INFORMATION Buster L MAIN DIMENSIONS Length overall, m 5,04 Hull length, m 5,04 Max. beam, m 1,98 Weight, unloaded, kg Max. total weight, kg 1030 CARRYING CAPACITY Recommended max. number of people Recommended max.
- Page 25 Inha Works Ltd. 2009 25 (31) APPENDIX 2: BUSTER L OVERALL ARRANGEMENT DIAGRAM Buster L Legend on page 26...
- Page 26 Inha Works Ltd. 2009 26 (31) The overall arrangements of the diagrams are not to scale. Because of the modular nature of the fittings available for the boat, the boat may not be equipped with all the fittings shown. Due to continuous product development, the manufacturer assumes no responsibility for possible variations.
- Page 27 Inha Works Ltd. 2009 27 (31) APPENDIX 3: CIRCUIT DIAGRAM FOR ELECTRICAL SYSTEM Circuit diagram for Buster L. Symbols and terminology on page 28.
- Page 28 Inha Works Ltd. 2009 28 (31) SYMBOLS AND TERMINOLOGY (RED) Red lead (BLK) Black lead (BRN) Brown lead (GRY) Grey lead BILGE Electrical bilge pump LIGHT W Mast light 360° white LIGHT R/G Navigation light, red and green 112.5°/112.5° BATTERY Battery ENGINE...
-
Page 30: Declaration Of Conformity
PO Box 1000, Kemistintie 3 Postal code: FI-02044 VTT Town: Espoo Country: Finland RECREATIONAL CRAFT INFORMATION Make and model of boat: Buster L Design category: C - coastal Type inspection and certificate no: VTT-C-4465-10-boat-001-09 Boat type: Open, single-hull outboard motorboat Construction material: Aluminium alloys... - Page 31 Inha Works Ltd. 2009 31 (31) General requirements Basic information EN ISO 8666:2002 A2.1 Hull markings ISO 10087:1996 / A1:2000 A2.2 Manufacturer's plate RCD annex I, 2.2 A2.5 Owner's Handbook EN ISO 10240:2004 Arrangements and equipment A2.3 Prevention of falling overboard EN ISO 15085:2003 A3.7 Stowing life raft...
Need help?
Do you have a question about the BUSTER L and is the answer not in the manual?
Questions and answers