Orbitsound A70 Handbook page 9

1
SUBWOOFER PAIRING
2
HOW TO PAIR THE SUBWOOFER:
1) Press and hold for 3 seconds the PAIR button on the back of the
subwoofer. The STATUS light will start to flash slowly when the
subwoofer has entered pairing mode.
2) Press and hold for 3 seconds the Vol - and Vol + buttons on the front
of the soundbar. The SUB light will flash slowly on the control panel
when the soundbar enters pairing mode.
3) The soundbar will now search for the subwoofer. When the pairing is
successful, the soundbar SUB light will go dark, and the subwoofer will
operate.
1
Note: If the pairing is unsuccessful, perform a BLUETOOTH RESET
on the soundbar.
BLUETOOTH RESET
1 2
You can clear all previous Bluetooth pairings (previously paired
3
devices) by resetting the Bluetooth system. Note, this will also clear
the subwoofer pairing information. After doing this, please follow the
procedure 'SUBWOOFER PAIRING' to reconnect the subwoofer.
To reset the Bluetooth memory: Press and hold the BLUETOOTH and
SRC buttons on the soundbar front panel for 3 seconds. The soundbar
will flash all lights to show that the operation is complete. The Bluetooth
memory is now cleared from all devices, including the subwoofer.
2
2
TV OPTICAL
AUDIO OUT
3
1
2 2 1
Subwoofer Pairing:
1) Long Press
subwoofer PAIR;
STATUS will flash 1
2) Long Press
soundbar Vol+ and Vol-
2
©2014 Orbitsound ltd.
1
Subwoofer Pairing:
1) Long Press
subwoofer PAIR;
STATUS will flash
2) Long Press
soundbar Vol+ and Vol-
1
4