Canon PIXMA iP6210D Service Manual page 20

8-2. Major Functions
(1) New Direct Print function
- Red eye correction: The red eyes area is selected from an image, and the red eyes are detected
- Memory card writing function: From the Menu, Setting of Read only (writing is not possible) and
<Possible problems with this function>
1) Print results is red-tinged. -> Change the correction value. (Shift to Y side.)
1) Direct Print is not possible. -> Release Write setting.
(2) Bluetooth printing support (option)
This printer has the Bluetooth printing function.
Install the optional Blurtooth unit (BU-20) in the printer.
<Possible problems with this function>
Printing is not possible. -> Shorten the communication distance or get rid of obstacles.
(3) Quiet mode
The printer has a quiet mode function.
Compared with the normal mode,
Acoustic noise level:
Audible overtone level:
Print speed:
<Possible problems with this function>
- The operation sound does not become quieter.
-> The audible sound becomes only slightly quieter.
- Printing is slow.
-> Disable the Quiet mode.
(4) Remaining ink level detection function
The printer has a function to detect the remaining ink level.
Detection method: Dot counting (Counted for each Photo/CL ink cartridge)
Display method:
Accuracy:
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
automatically. Correction is made at the detected area.
Read_Write (writing is possible.) is possible.
HS normal approx. 52.7 dB, Quiet approx. 47.5 dB
Sound quality changes, and sound becomes quieter.
Slows.
Photo / CL cartridge:
Displayed on the Status Monitor (at 4 levels listed below for each Photo/CL ink
cartridge)
Level 1: Approx. 70% of ink remaining
Level 2: Approx. 40% of ink remaining
Level 3: Indication of "!" mark (Remaining ink level is low)
Level 4: Indication of "X" mark (No ink remaining)
Note: Remaining ink detection function displays the status only, and does not
cause errors.
The margin of error of detection accuracy is +/-10% in normal printing.
The margin of error is likely to be large in the following specific print patterns:
When printing continuously using any one of the Photo /CL three colors of ink
-> As the remaining ink level is calculated by the counted dot value of the
least remaining ink of the Photo /CL three colors, if any of the C/M/Y inks is
heavily consumed, the margin of error for remaining ink increases.
(20/25)
The remaining ink level is detected by total counted
dot values of Photo /CL three colors.