Canon PIXMA iP6210D Service Manual page 12

<Destination setting procedures>
At Logic board replacement, make settings for each destination.
The number of the Reset
button pressing
0 time
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 or more times
<Waste ink counter reset procedures>
At the waste ink absorber replacement, reset the waste ink counter for the replaced waste ink absorber.
Setting operation for the waste ink counter (The counter setting value is selected by pressing the Reset button.)
The number of the Reset button
pressing
0 time
1 time
2 times
<Button / LCD checking operation procedures>
At Operation panel unit replacement, check the button / LCD.
1. When the Stop Reset button is pressed, FEMS<>BP will be displayed on the monitor.
2. Each button (excluding the Power / OK / Stop/Reset button) will be off by pressing each button.
3. When all buttons excluding the Power / OK / Stop/Reset button are pressed, PASS will be displayed.
4. When the Power button is pressed, the printer returns to a service mode menu selection.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
LED
Green No change
Orange Japan
Green Korea
Orange US
Green Europe
Orange Australia
Green Asia
Orange China
Green Taiwan
Returns to a menu selection
LED
Green Reset the main waste ink counter to 0%.
Orange Reset the platen waste ink counter to 0%.
Green Reset the Main & platen waste ink counter to 0%. (Reset
collectively.)
Destination
(12/25)
Paper for defaulte setting
A4
A4
Letter
A4
A4
A4
A4
A4
A4