Canon PIXMA iP6210D Service Manual page 11

＜Service mode operation procedures＞
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
0 time
1 time
2 times
3 times
4 times
5 times
6 times
11 times
12 or more times
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
LED
Green Power off
Orange Service pattern print
Green EEPROM print
Orange EEPROM reset
Green Waste ink counter reset
Orange Destination setting
Green Print head deep cleaning
Orange Button / LCD checking
Returns to a menu selection
Function
(11/25)
Remarks
See APPENDIX 1:
SHIPMENT INSPECTION
PATTERN 1: PRINT
SAMPLE
See APPENDIX 2:
EEPROM INFORMATION
PRINT
See waste ink counter reset
procedures below.
See Destination setting
procedures below.