Canon PIXMA iP6210D Service Manual page 9

3-2. Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (Power LED))
Cycles of blinking
in orange and
green
2 times Carriage error [5100]
3 times Paper feed error [6000]
4 times Purge unit error [5C00]
5 times ASF(cam) sensor error [5700]
6 times Internal temperature rise error [5400]
7 times Waste ink absorber full or platen waste ink
absorber full [5B00]
8 times Ink cartridge temperature rise error [5200]
9 times EEPROM error [6800]
13 times Paper feed position error [6B00]
15 times USB Host VBUD overcurrent error [9000]
Abnormal motor driver error [6Ｄ00]
17 times
20 times Other hardware error [6500]
Continuous ROM error
alternate blinking
Alarm LED ROM error
(orange) lit
3-3. Ink Low Warning (Ink low warnings are displayed by the Status Monitor only when the remaining ink
level detection is enabled, and no Status Monitor display when disabled.)
Note: The Status Monitor display in the table below is for Windows.
Warning
Ink low warning 1 (approx. 70% of ink remaining)
Ink low warning 2 (approx. 40% of ink remaining)
Ink low warning 3 (low remaining ink)
Ink low warning 4 (no ink remaining)
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Error
(9/25)
Corrective Action
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Replace the printer as it has failed.
Display by Status Monitor