Problem Solving Guide Troubleshooting; Visit Maytag Vacuums Online; Telephone Customer Support; Key Replacement Parts - Maytag M1200 Owner's Manual

Hide thumbs Also See for M1200:
Table of Contents

Advertisement

PRoBleM solVInG GUIDe
Troubleshooting
CAUTION! To reduce the risk of injury from moving parts, unplug the vacuum before servicing.
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with wet hands.
PROBLEM
Vacuum won't turn on
Vacuum won't pick up or
low suction
Dust escaping from vacuum
Any other service should be done by an Authorized Maytag Vacuum Service Center.
To locate your nearest service center, visit our website at www.MaytagVacuums.com.

Key Replacement Parts

• Genuine HEPA Media Vacuum Bags: M12H-6
• Genuine Filter Set: M12F

For Best Performance

Keep your vacuum clean and in good operating condition.
Change vacuum bags once a month or when the full bag light is illuminated to maximize cleaning
performance.
Always use genuine Maytag™ vacuum bags and replacement parts. Use of other products may
result in poor cleaning performance, potential vacuum cleaner damage and may void vacuum
warranty. Genuine products are designed for maximum cleaning performance.
Have your vacuum checked annually by your Authorized Maytag Service Center.
Store your vacuum carefully in a dry area.
For optimum cleaning performance and safety, follow your owner's manual instructions.
POSSIBLE REASON
• Power cord not firmly
plugged in.
• Blown fuse or tripped
breaker.
• Needs service.
• "Carpet" button not on.
• Vacuum bag is full.
• Clogged filter(s).
• Hose clogged.
• Worn brushes.
• Broken belt.
• Tool Activation Dial
turned "On".
• Dust compartment cover
not attached properly.
• Filters not installed correctly.
For telephone customer support please call 1-855-653-1114.
POSSIBLE SOLUTION
• Plug unit in firmly.
• Check house fuse or
• Take to an Authorized
• Press "Carpet" button on –
• Replace bag.
• Replace filter(s).
• Remove obstacle.
• Replace brush strips.
• Take to an Authorized.
• Turn Tool Activation Dial to
• Attach the dust compartment
• Review filter installation
20
breaker. Replace fuse /
reset breaker.
Maytag Service Center.
it will illuminate when
it's on.
Maytag Service Center.
"Off" position for carpet or
bare floor cleaning.
cover and secure latch.
(page 15-17).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents