Problem Solving Guide; Troubleshooting; Key Replacement Parts; For Best Performance - Maytag M600 Owner's Manual

PROBLEM SOLVING GUIDE

Troubleshooting

WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug
the Charger from the Charge Point and remove the Battery Before Servicing or
Cleaning the Vacuum.
CAUTION! To Reduce the Risk of Electric Shock, Do Not Handle Charger Plug or Appliance
with Wet Hands.
Problem
Vacuum won't turn on
Vacuum won't pick up,
or low suction
Dust escaping from vacuum
Any other service should be performed by an Authorized Maytag
To locate your nearest Authorized Retailer, visit our website at www.MaytagVacuums.com or
call 1-855-653-1114.

Key Replacement Parts

• Genuine HEPA Media Vacuum Bags: M5H-6
• Genuine Vacuum Belts: M5B-2

For Best Performance

• Keep your vacuum clean and in good operating condition.
• Change the vacuum bag once a month or when the bag is 2/3 full to maximize
cleaning performance.
• Always use genuine vacuum bags and replacement parts. Use of other products may
result in poor cleaning performance, potential vacuum cleaner damage and may void
vacuum warranty. Genuine products are designed for maximum cleaning performance.
• Have your vacuum checked annually by your Authorized Maytag
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner's manual instructions.
Possible Reason
• Battery requires charging
• Needs service
• Vacuum bag full
• Broken belt
• Worn brushroll
• Vacuum bag not installed
properly
14
Possible Solution
• Charge battery (page 6)
• Take to Authorized Maytag
Vacuum Service Center
• Install new bag (page 9)
• Replace belt (page 12)
• Replace brushroll (page 12)
• Install bag properly. Review
bag installation (page 9)
Vacuum Service Center.
®
Vacuum Service Center.
®
®