Table of Contents
Advertisement
4. What's wrong with my cylinder cleaner? HELP!
If a minor problem occurs, it usually can be solved quite easily when the cause is found by
using the check list below. Turn cleaner off and disconnect cable from electrical source-
outlet before performing any maintenance tasks.
What's the problem?
It won't turn on
What's the problem?
I sucked up something, and I need it back!
What's the problem?
It's making a bad noise
What's the problem?
I need a new bag
Clearing blockages
Low suction or pick up may be due to a blockage in the system. Refer to the following steps to check for block-
ages, continuing with each step until the blockage is found.
1. Turn cleaner OFF and disconnect from electrical source; then disconnect the wand from the hand grip.
2. Plug cleaner in, turn on, and check hose end for suction. Remove any obstructions.
3. Remove nozzle from wand and attach wand to hose. Check for suction and remove any blockages.
8
What does it mean? What should I do?
Not firmly plugged in.
Be sure cleaner is firmly plugged into an
active electrical outlet with the correct voltage/
wattage needs.
What does it mean? What should I do?
Don't worry. If you have sucked up something
valuable, you can simply retrieve it from the
throw-away vacuum bag. Simply turn it off,
unplug power cord and remove bag and
empty.
What does it mean? What should I do?
There may be an internal fault, or something
stuck inside. We recommend you turn the
unit off, unplug and bring to an authorised
service centre. To locate an authorised
service centre near you, call 01737 231000
(9 AM to 5 PM, Monday - Friday);
email us at ukservice@maytag.com.
What does it mean? What should I do?
New bags can be purchased at your local
Maytag cleaner retailer.
Alternatively, you can buy more bags from
Maytag directly by calling 01737 231000.
Advertisement
Table of Contents
